Surface Additives Flow Additive vs Leveling Additive: Key Difference in Paints and Coatings Flow additives and leveling additives both improve coating appearance, but they solve slightly different surface problems. Understanding the difference helps coating manufacturers reduce orange peel, brush marks, roller marks, craters, poor smoothness and uneven film formation. Request Product Guidance Explore Flow & […]
Industrial Foam Control Silicone vs Non-Silicone Antifoam for Industrial Coatings Choosing between silicone and non-silicone antifoam is an important decision in industrial coating formulation. The right foam control additive can reduce foam, microfoam, craters and pinholes without affecting gloss, leveling, recoating or surface appearance. Request Product Guidance Explore Antifoam for Coatings Overview Why antifoam selection […]
Foam Control Additives Antifoam vs Defoamer: What Is the Difference in Coatings? Foam is one of the most common formulation and application problems in paints and coatings. Understanding the difference between antifoam and defoamer additives helps coating manufacturers choose the right foam control solution for better surface finish, processing stability and coating quality. Request Product […]
Antifoam for Coatings Antifoam for Coatings: How to Choose the Right One for Water-Based and Solvent-Based Systems Choosing the right antifoam for coatings is important for controlling foam during production, filling, storage, and application while maintaining surface finish, gloss, leveling, film stability, and overall coating performance. Discuss Your Foam Issue Explore Antifoam Additives Table of […]
Antifoam for Industrial Coatings Common Foam Problems in Industrial Coatings and How Antifoam Additives Help Foam can affect industrial coating production, filling, application, appearance, and final film performance. The right antifoam for industrial coatings helps formulators manage foam at different stages without disturbing coating stability, flow, leveling, or surface finish. Discuss Foam Issues Explore Antifoam […]
Adhesion Promoter for Coatings How to Select the Right Adhesion Promoter for Industrial Coatings Adhesion problems in industrial coatings often start at the interface between the coating film and the substrate. The right adhesion promoter can support better bonding, substrate wetting, film integrity, and long-term coating performance when selected according to the substrate, resin system, […]
Coating Additives Blog How Antifoam Dosage Affects Coating Performance and Common Overdose Problems Antifoams are essential for controlling foam during manufacturing, filling, and application of coatings. But the right product alone is not enough. Dosage plays a major role in how well an antifoam performs and whether it introduces side effects into the coating system. […]
Home / Blog / Why Foam Forms in Coatings Coating Additives Blog Why Foam Forms in Coatings and How Antifoam Additives Solve It Foam formation is a common challenge in coating manufacturing and application. During mixing, grinding, or application, air can become trapped inside the coating formulation. These air bubbles can cause surface defects, reduce […]