Adhesion Promoter for Coatings How to Select the Right Adhesion Promoter for Industrial Coatings Adhesion problems in industrial coatings often start at the interface between the coating film and the substrate. The right adhesion promoter can support better bonding, substrate wetting, film integrity, and long-term coating performance when selected according to the substrate, resin system, […]
RSA Knowledge Center Why Coating Adhesion Failure Happens and How Adhesion Promoters Help Coating adhesion failure can lead to peeling, flaking, delamination, poor durability, and costly rework in industrial applications. This blog explains why adhesion problems happen, which factors influence coating-substrate bonding, and how an adhesion promoter for coatings helps improve adhesion performance in demanding […]
RSA Knowledge Center How to Select a Dispersing Additive for Industrial Coating Formulations Selecting the right dispersing additive for coatings is not only about improving grind efficiency. It is about achieving better pigment stabilization, colour development, gloss, viscosity balance, storage stability, and batch reproducibility. This blog explains the key factors formulators should evaluate when choosing […]
RSA Knowledge Center How to Select a Dispersing Additive for Industrial Coating Formulations Selecting the right dispersing additive for coatings is not only about improving grind efficiency. It is about achieving better pigment stabilization, colour development, gloss, viscosity balance, storage stability, and batch reproducibility. This blog explains the key factors formulators should evaluate when choosing […]
RSA Knowledge Center Wetting Agent vs Dispersing Additive in Coatings: What Is the Difference? In coating formulation, the terms wetting agent and dispersing additive are often used together, and sometimes interchangeably. But they do not always mean the same thing. This blog explains the difference between a wetting agent and a dispersing additive for coatings, […]
RSA Knowledge Center Dispersing Additives for Carbon Black and Difficult Pigments in Industrial Coatings Carbon black and other difficult pigments are among the most challenging materials to stabilize in industrial coatings. This blog explains why these pigments are harder to disperse, what problems they create in formulations, and how the right dispersing additive for coatings […]
RSA Knowledge Center Common Pigment Dispersion Problems in Coatings and How Dispersing Additives Help Pigment dispersion problems in coatings can lead to colour inconsistency, gloss loss, poor stability, and visible film defects. This blog explains the most common dispersion-related issues and how the right dispersing additive for coatings helps improve stability, process efficiency, and final […]
RSA Knowledge Center Dispersing Additive for Coatings: What It Does and Why It Matters A dispersing additive for coatings plays a critical role in helping pigments distribute evenly, remain stable, and deliver the appearance, strength, and consistency expected from modern industrial coating formulations. In this blog, we explain what dispersing additives do, why they matter, […]
RSA Technical Blog What Causes Orange Peel in Industrial Coatings? Orange peel is one of the most common surface appearance defects in industrial coatings. This blog explains what causes it, why flow and leveling matter, and how formulators can reduce surface irregularity and improve final film finish. Industrial Coatings Flow & Leveling Surface Defects Table […]
RSA Technical Blog Common Adhesion Problems in Industrial Coatings and How to Solve Them Adhesion problems in industrial coatings can lead to peeling, flaking, delamination, and early coating failure. This blog breaks down the most common adhesion issues, why they happen, and how formulators can approach practical solutions. Industrial Coatings Adhesion Problems Problem-Solution Blog Table […]